If you have trouble in Towson with heating due to a furnace that isn’t working properly, there are usually two initial components to consider in order to troubleshoot where the problem may be coming from: your thermostat, or a problem with the furnace itself. Once you figure out which general area is affecting the behavior of your furnace, you can proceed with heating repairs more easily from there. One complaint that Towson residents often have with regard to their furnaces during the cold months of the year occurs when the furnace is set at a certain level or temperature and never seems to be able to reach it. In other words, you might set your thermostat at seventy degrees, but the furnace itself runs until it his sixty-five then shuts off, never getting any warmer.
If you set the temperature at a certain point and the heat never seems to reach it, it’s possible that it may be a thermostat problem. There are often times when the thermostat may have somehow been skewed and is simply not mounted correctly. One of the components, the mercury switch, will malfunction if the thermostat is not level. To see if this is the case, one option would be to take the cover of the thermostat off and adjust it so that it is not crooked, but is correctly mounted in its place. Replace the cover and see if that resolves the problem.
If not, you may have to investigate other causes before attempting heating repairs or contact professional heating repairs technicians in Towson for a consultation and fix. If you are not quite ready to give in and opt for the latter solution, you may check to make sure that the heat anticipator is correctly adjusted. This is most basically a wire that controls the flow of electricity in your thermostat to turn it off when it reaches a certain temperature. If you do not know how this works or how to adjust it, you might want to call a service professional in Towson to make the heating repairs for you. Working on wiring on your own when you do not fully understand it can be dangerous.
If you do understand it, then making an adjustment of the heat anticipator may solve the problem. This will entail recalibrating the thermostat by moving the indicator further away from the “long” setting. This should be done in increments, and for the heating repairs to be fully tested, you will need to wait a couple of hours before making any further adjustments.
Heating Repairs Towson – Baltimore winters can be brutally cold, and heating repairs in Towson should be left to the professionals. Baltimore-based Stone Services, Inc. provides heating, air conditioning, air purifying, and emergency HVAC service to residents throughout the area. Call Stone Services, Inc. today at 800-CLEAN-AIR (25326-247) for a FREE estimate. Or visit http://stoneservicesmd.com/index.htm
