When the AC fails, it is time to consider an expert such as Parkey’s Heating & Air Conditioning. One reason for this is the complex nature of cooling systems. Granted, the ideas behind these systems seem fairly simple, but the actual application can be very complex. The basic design requires a condensing system, at least two coils and a refrigerant. The complexity arises when attempting to control the flow of refrigerant or the various cycles that an AC has. One single fault could require an expert in Air Conditioning Repair in Colorado Springs to eliminate the issue.
Flow control is usually handled by the refrigerant and condensing unit because the compressed refrigerant pushes the chemical in front of it through the pipes. Problems arise when the coil gets blocked, or one of the electronic circuits fail. The former often results in a frozen area on the coil while the latter usually shuts things down. A frozen coil can quickly rupture and allow the refrigerant to escape. When this occurs, the unit will fail to function since safety systems are installed to protect expensive components. This should prevent the condenser, one of the most expensive parts of the AC, from overheating or locking up.One reason for contacting professional Air Conditioning Repair in Colorado Springs is routine maintenance. These simple procedures could keep an AC operating for many years along with any necessary repairs to failing parts. The first step is cleaning. This is actually necessary whenever the evaporator coil gets dirty. Dirt and debris can easily coat the coil, and it begins to stick when condensation occurs. Once this stuff dries, it can be tough to eliminate. The solution is to remove the coil and clean it in an acid bath.
Other types of maintenance involve testing the electronic circuits and verifying the refrigerant level. This last step is necessary to keep the system running at peak efficiency. A low coolant level will affect various parts of the system. Low refrigerant could cause major problems with the condenser because this device requires the lubricant that the refrigerant carries. Low coolant levels will reduce the ability of the system to accumulate heat which means the treated area won’t be as cool as it should be. This forces the system to work harder for the same effect. Visit the website for more information.
