A septic system is an important part to removing the waste and water from a home. Sometimes due to flooding from the weather, a vehicle driving over the system, or due to not pumping a septic tank, the leach field can become damaged. When this occurs, water is unable to drain from the septic system problem and filter into the ground. There may be a smell of sewage or the yard or wet spots with grey water surrounded by many gnats. If this is the case, it’s important to contact a company that performs Leach Field Repair in Tacoma.
Septic tanks that are not pumped and overflow can cause extensive damage to a leach field. Clogs can occur and there is not a way to correct the problem except to tear up the existing leach field. When a professional performs Leach Field Repair in Tacoma, a septic system can operate properly after repairs are performed. The benefit of a new technology allows the repair to include a jetting system. This jetting system can clean the drain field laterally and clear clogs. This type of repair can help to eliminate the need for the entire leach field from being torn out and replaced.
Another part of the repair is installing clean-out and vent accesses. A probe is used to dig deep into the soil with a pneumatic hammer. This system forces air into the solid and creates a high-pressure compressor that will create cracks in the solid material that has formed. It can also loosen compressed soils so drainage flows more smoothly. This cleans out the trenches for the system and it can properly drain. This type of repair is much less invasive than bringing a backhoe in to dig into the yard and replacing the grass in the area that’s been dug up.
When the septic system isn’t working properly, don’t try to repair it. It could result in added costs that isn’t needed. Contact a professional to locate and inspect the system. They can offer the proper suggestions to correct the problem in the most efficient manner possible. This type of repair will keep the septic system operating properly for years to come.
