When a basement is showing signs of water problems, there’s a good chance the French drains need to be replaced. French drains are found near the footer of a building and help to move the groundwater away from the foundation of a building. If these drains fail due to clogging, French drains in Cambridge MA will need to be replaced as quickly as possible.
For many owners, excavating around a building would cost additional money to replace sidewalks, driveways, and landscaping. Indoor French drains are much easier to install and will operate the same as an outside drain. When drains are installed inside the foundation, they will be put in adjacent to the footer of the structure to collect the water at its lowest point and move it to the outside.
How Does The Water Get Out Of The Basement?
When French drains are installed in a basement, the pipes will travel to a pit where a pump is located. As the water fills the pit, the pump will turn on and push the water to the exterior of the structure. French drains should be installed when a basement needs to be waterproofed or if the walls or floors are suffering from water damage due to hydrostatic pressure.
Hydrostatic pressure pushes against the walls of a foundation and causes them to crack. This pressure can happen when the French drains are clogged by dirt, tree roots, or poor drainage around a foundation.
Installation Of French Drains
To install French drains in Cambridge MA, a portion of the floor around the walls of the foundation will have to be removed to create a trench. Gravel will be put in the trench along with a four-inch, perforated pipe. A membrane should be installed over the pipe and gravel and extend up the wall. All of the pipes will connect and drain to a pit where a sump pump is located to remove the water.
They have many years of experience resolving water problems in buildings throughout the Cambridge area.